多年致力于載帶成型機設備開發生產
載帶成型機 分條復卷機 全自動載帶成型機全國咨詢熱線135 9362 1571
136 4095 2379
多年致力于載帶成型機設備開發生產
載帶成型機 分條復卷機 全自動載帶成型機全國咨詢熱線135 9362 1571
136 4095 2379
此機使用三相電源:最大功率15KW
規格:長4.2m*寬1.15m*高2.02m(含模溫機)
一出六高速滾輪機:此機廣泛用于半導體和精密載帶方面的生產(例如;微電感、微晶振、微電容、微電阻、及半導體等電子承接帶)，是一款高精度機型，此機型全尺寸可達到+0.03mm--0.05mm之間、機器單條出帶速度可7--10米/分鐘，(根據成型產品難度而定)機器生產產品品質要求高、產率快、操控性好、美觀、大氣等優點，也可解決粒子機的缺陷、產品表面有顆粒和帶面厚度不均不好封合的現象。
這款機型與粒子機相比，有顯著的性價比和品質優勢、滾輪機生產的裁帶表面無顆粒，帶面厚度均勻，封合良好。整體機型外觀美觀大氣，迭代配置上現代氣息掀蓋式設計門，增加了機器的美觀，整潔，安全防護，且有著最大限度的隔音功能。此設備可生產 W8x4、W8x3、W8x2、W12x4、W12x3、W12x2、W16x3、W16x2 載帶產品。
This machine uses a three-phase power supply: maximum power of 15KW Specification:length 4.2m * width 1.15m* height 2.02m (including mold temperature machine) One out sixhigh-speed rolling machine: This machine is widely used in the production of semiconductorsand precision tapes (such as inductors, microcrystals, microcapacitors, micro resistors, andelectronic tapes for semiconductors), and is a high-precision model. The full size of thismodel can reach between + 0.03mm and 0.05mm, and the machine's single tape outputspeed can be 7-10 meters/minute (depending on the difficulty of foming the product). Themachine has the advantages of high product quality requirements, fast yield, goodcontrollability, beauty, atmosphere, etc. it can also solve the defects of particle machines.particles and tape surfaces on the product surface, The phenomenon of uneven thicknessand poor sealing.
Compared with particle machines, this model has significant cost-effectiveness and qualityadvantages. The carrier surface produced by the rolling mill is particle free, the thickness ofthe belt surface is unifom, and the sealing is good. The overall appearance of the model isbeautiful and atmospheric, with a modem style flip up design door that enhances themachine's aesthetics, cleanliness, safety protection, and maximum sound insulation functionThis device can produce W8x4, W8x3, W8x2, W12x4, W12x3, W12x2, W16x3, W16x2 carierproducts.
